| Liner Directory |
| Home |
| Liner Designs |
| Options |
| Reference |
| |
|
|||
 Glued-in Liner  Sewn Tabbed Liner  Sewn Flange  Tie-in Liner |
1 | Glued-in Liner | |
| A liner glued either at the top, bottom, or sides of a Super Sack® Container. Gluing will position and hold the liner in place during the fill and discharge of product from the container. |
|||
| Sewn Tabbed Liner | |||
| Reinforcement tape tabs attached to the liner are sewn into Super Sack® Containers at opposing diagonal corner side seams. The tabs position the liner during fill and discharge of the product. Two tabs per liner are standard. Extra tabs are available as determined by the customer's requirement. |
|||
| Sewn Flange | |||
| The cube and MaxLinerTM liners have an extended top and bottom flange that is sewn between a Super Sack® Container's top and side, or bottom and side panels. |
|||
| Tie-in Liner | |||
| Strings are attached to the liner and tied to the top corners of the Super Sack® Container to position and hold the liner in place during fill and discharge of the product from the container. This is an easy method to remove liner after use for refurbishment of the container. |
|||
| 2 | Closures | ||
| For both top and bottom design applications. Cordlock: (B) Standard Cordlock, with spout locking device, (G) Heavy-duty Cordlock Ties: (A) Wire Tie, (D) Plastic Tie, (E) Web Tie, (F) Drawstring Miscellaneous: (C) Velcro® Hook and Loop, Resealable Closure (Not Shown) |
|||
 |
|||
| B.A.G. Corp. 11510 Data Drive Dallas, TX 75218 USA 214-340-7060 Tel 800-331-9200 Tel 214-340-4598 Fax Email Us |
| Super Sack® is a Registered Trademark of B.A.G. Corp. |
| Copyright © 2008 B.A.G. Corp. All rights reserved. |