Super Sack FIBC Options

image description

Top Designs

Engineered for ease of use and maximum filling efficiency.

Options
Fill Spout A standard Super Sack container fill spout is 14" in diameter by 19" long. Other standard size options include 10", 18", and 22" diameters. Custom sizes are available.

Cone Top For aerated/high angle of repose products.

Full Opening Duffel Top All purpose use.

Protective Top Cover For contamination control.

Closures
Miscellaneous Hook & Loop (Velcro®); Zipper

Ties Drawstring; Plastic Tie; Web Tie; Tamper Resistant Ties; Wire Tie

Cordlock A locking device for closing bag spouts. Standard Cordlock; Heavy-duty Cordlock

 


Bottom Designs

Choosing the proper discharge option saves the end-user both time and money and improves product handling efficiency. Select from the following discharge options to match your needs.

Options
Standard Discharge Spout Our standard Super Sack container discharge spout is 14" diameter x 19" long with a duffel cover over spout for protection. Other standard size options include 10", 18", and 22" diameters. Custom sizes are available.

Flat Bottom Cost-effective bottom design for one-way use. Container must be cut for discharge.

Concentric Discharge Spout Reduces dusts during discharge. Ideal for contamination sensitive products. (Not shown).

Full Open Dump For products with poor flow characteristics.

Cone Bottom For products that bridge or have poor flow characteristics.

Double Bottom For products with a high bulk density or to reduce puncturing potential. (Not shown).

Protective Bottom For contamination control. (Not shown).

Sling Bottom Construction for high bulk densities and/or heavy weight capacities.

R.O.D.™ (Remote Open Discharge) Takes the operator out from under the bag during discharge.

Closures
Miscellaneous Hook & Loop (Velcro®); Zipper

Ties Drawstring; Plastic Tie; Web Tie; Tamper Resistant Ties; Wire Tie

Cordlock A locking device for closing bag spouts. Standard Cordlock; Heavy-duty Cordlock
image description

image description

Lift Loop Designs

Standard Super Sack container lift loop lengths are 10", 14", or 22". Custom lengths are also available.

Loop Designs
Long Straps For center pickup. (Not shown.)

Stevedore Straps Two lengths of heavy duty webbing, each threaded through two lift loops, brought together in the center of the container, to allow a one point pickup.

Cargo Straps One length of heavy duty webbing threaded through all four lift loops to allow a one point pickup.

Sleeve-Hemmed Sleeve construction replaces straps for easy forklift entry. Capacity up to 3,000 lbs.

Spread Strap™ Easy forklift access and handling.


Loop Options
Custom woven and quality checked in our manufacturing facilities, our lift loops are 100% polypropylene (unless noted) with several weights, and many colors from which to choose.

Standard Super Sack Container 2" Strap Webbing Available in standard white or Gem™ colors (red, blue, yellow, green, and black). Other colors are available by special order.

Tubular Super Sack Container 3" Strap Webbing Available in standard white or Gem colors (red, blue, yellow, green, and black). Other colors are available by special order.

Heavy Duty 2" Strap Webbing Available in standard white.

Super Sack Container Tuff Strap™ Webbing Available in white, red, blue, green, and black. This rigid strap webbing is cut resistant and maintains an upright position.

Conductive 2" Strap Webbing Used on Pactainer ED+® containers. Has conductive tapes and dissipative thread woven through the webbing allows static charges to dissipate through the webbing.

Seatbelt 2" Strap Webbing Polyester seatbelt webbing.

 

 

 


 

 

Container Identification

We offer several options for custom product identification.

Cardholder/Placard
Plastic envelope or placard sewn to the FIBC for product information inserts. Available in many sizes.

Colored Fabrics and Lift Loops
Aids product identification.

Printing
Up to four colors on side and top panels.
image description
 


 
image description
 

 

 

Fabrics

Our standard fabric is 100% recyclable, food grade woven polypropylene fabric, treated for ultraviolet resistance for limited outside storage and engineered for the rated capacity of the container. Fabric selection is dependent on performance requirements. All fabric is made from virgin polypropylene resins.

Colors
Available in standard white or black.

Weights
Available from three to eight ounces.

Coatings
Standard coating is a 1.0 mil. polypropylene for moisture control and product contaminant protection. Other options are available.

Static Control Fabrics
Crohmiq™ Blue provides reliable static dissipation without grounding.

Pactainer ED+® is designed to control electrostatic charges through the lift loop webbing. Charges are conducted to ground via a conductive tape grid woven into the fabric, eliminating static charges when grounded.

 

 

 

 

 

 


Special Construction

Super Sack containers can be made to any of the following packaging requirements.

Sift and/or Moisture Resistant
F1 Sift resistant construction. Filler cord in side seams, top and bottom setting seams.

F2 Sift resistant construction. Filler cord in side seams, top and bottom setting seams, and top chute sewing and setting seams.

F3 Sift resistant MaxSack™ construction. Filler cord in side seams, bottom setting seams, and top chute sewing and setting seams. A 1.25” reinforcement web is sewn around top when setting the top into the bag and a 1/2” web is sewn between baffles and side panels.

RAT (Reinforcement Around the Top)
Webbing sewn around the top perimeter of the bag for added strength.

Clean Seal® and Ultrasonic Cutting Technology
Our exclusive Clean Seal cutting technology produces a smooth, clean, clear edge after cutting.

Clean Level I Standard for all of our Domestic/Mexico Super Sack containers. All fabric is cut using our proprietary Clean Seal process to melt and seal the edges or with our ultrasonic cutting technology, both of which prevent raveling and contamination. Most seams are sewn to the outside to prevent any possible contamination in the container.

Clean Level II Same as above, plus the fill and duffel discharge spouts are wrapped around the hole in top and bottom panels of the container.

Clean Level III Extra Clean; all fabric edges, other than hemmed edges, are cut using Clean Seal or ultrasonic cutting technologies, both of which produce the cleanest edge possible. All thread ends are burned; the fill and duffel discharge spouts are wrapped around the hole in top and bottom panels.

Clean Level/Food Grade Can include any Clean Level listed above and includes: Tops and bottoms cut with the ultrasonic cutting machine have clean sealed top and bottom spout hole edges. Employees wear appropriate garments, such as beard covers and hairnets, and use disinfectant soap at washing facilities. All contact surfaces in the manufacturing area are washed down with a disin- fectant solution. When specified, assembled containers are scanned using state-of-the-art metal detection equipment, finding any metal objects that typically would escape conventional visual inspection. Finished bags are packaged in a lined baler bag and set on a new pallet for shipping.
image description
 


 
image description

Accessories

(A)Standard Cordlock,
(B)Heavy-duty Cordlock
(C)SackPatch™ Tape 6" wide x 75' long, polypropylene material with adhesive backing. Used for minor repair of damaged bags.
(D)R.O.D.™ Release Hook
(E)Wire Tie 12" and 16"; individual quantities or rolls of 1,000.
(F)Wire Tie Pull Twist Tool
(G)Plastic Tie